Charlotte Mold FixMold testing, remediation and renters' rights · Charlotte, NC

Charlotte's Creek Floods, and Stopping the Mold That Follows

Charlotte has no big river through its middle; its flood risk runs along dozens of creeks threaded through neighborhoods. When they rise, they rise fast, and the mold that follows depends on how fast the house dries.

Request a mold inspectionRead the FAQ

USGS gauges show Charlotte's creeks peaking in different storms: Irwin Creek at 11,600 cubic feet per second on July 23, 1997, Little Sugar Creek at Medical Center Drive on November 12, 2020, and Briar Creek on August 27, 2008. After any flood, the EPA's rule holds: dry within 24 to 48 hours or expect mold.

Muddy creek running high after heavy rain, spilling over a grassy greenway bank under trees, footbridge beyond
A creek running high and brown after heavy rain, spilling onto the grassy bank of a greenway.

What the USGS gauges show

  • Irwin Creek near Charlotte. 63 years of annual peaks; the highest, 11,600 cubic feet per second, came on July 23, 1997, followed by August 5, 2011 and November 12, 2020.
  • Little Sugar Creek at Medical Center Drive. Records since 1995; the top two are November 12, 2020 (5,520 cfs) and July 23, 1997 (5,310 cfs).
  • Briar Creek near Charlotte. Highest flow on August 27, 2008, with January 9, 2024 close behind.
  • Sugar Creek at NC 51 near Pineville. Highest on July 23, 1997; November 12, 2020 and September 16, 2018 rank next.

Two dates, July 23, 1997 and November 12, 2020, sit near the top of several gauges at once (USGS).

Why creek water is a mold problem, not just a cleanup

Floodwater soaks drywall, insulation and flooring from the bottom up, and in Charlotte's summers, with July dew points near 68°F (NOAA), wet materials dry slowly. Creek water also carries silt and sewage, so soaked carpet, pad and upholstered pieces are usually thrown out rather than cleaned. The longer the water sits, the more material has to come out. See mold remediation.

The first 48 hours after water gets in

  1. Stay out until power to wet areas is off and the structure is safe.
  2. Photograph and list damage before removing anything, for insurance.
  3. Get standing water and mud out, and pull wet carpet and pad.
  4. Cut wet drywall above the water line and remove wet insulation.
  5. Run fans and dehumidifiers with windows closed if outdoor air is humid.
  6. Clean hard surfaces and let framing dry fully before closing walls.

The EPA's window for drying is 24 to 48 hours. Compare published prices in the Charlotte mold removal cost guide.

Insurance and renters after a flood

Standard homeowners and renters policies generally exclude flood damage; flood coverage comes from a separate flood policy, so check what you carry before work begins. Renters should report flood damage to the landlord in writing; G.S. 42-42 lists flooding from inadequate drainage that contributes to mold among the dangerous conditions a landlord must repair. See rental mold.

Describe the mold, and the home

A sentence or two helps: where you see or smell it, what got wet first, and whether you own the home or rent it. A specialist working in Charlotte gets the note and replies to you.

What's going on?

Only the local specialist gets it, to reach you about this.

Free to ask. No obligation. Many local specialists don't charge for the first visit; ask when they call.

This site is run by a referral service that is paid by the specialists it connects you with. Asking costs you nothing.

A local mold specialist who serves Charlotte will call you back. Your request goes to that one independent specialist, not a list. By sending this you agree they may call or text you about it. Privacy.

Request mold inspectionSee prices